SR1041E
Introduction
SR1041E is a device manufactured by FiberHome, designed to offer essential features to its customers. This document details the capabilities and limitations of the device as tested and validated in our IXC ACS system.
The described features were tested and validated in the following version:
- Firmware approved: RP0105- Hardware approved: SR1041E R1A- DataModel: TR-098 Pre-configurationPré-Configuraçãoapplies initial parameters to the network. Check below the management features via IXC ACS:
Functionality
Bind Layer (LAN)
Path: Tools Menu > Device Preset.
Actions on the Device
Actions that directly impact the device:
Functionality
Way: Devices Menu > Device > three points.
Internet
Features related to network settings:
# PPP and IP/DHCP
Functionality
IPv4 DNS
IPv6 DNS
VLAN Configuration
Way: Devices Menu > Device > Connectivity Tab > Internet. LAN Essential settings for your local network:
Functionality
Gateway
Way: Devices Menu > Device > Connectivity Tab > LAN.
Wi-Fi interfaces
- 2.4GHz and 5.8GHz
Functionality
Password Change
Bandwidth
Functionality
Band Steering Mesh Network
Way: Devices Menu > Device > Connectivity Tab > Wi-Fi interfaces.
Connected Devices
Functionality
Network Topology
Way: Devices Menu > Device > Connectivity tab > Connected devices.
Redirection and Web Management
Functionality
Remote access
Door redirection
TCP/UDP Diagnosis Diagnostics available on the device:
Functionality
Ping No Traceroute.
Path: Device Menu > Device > Diagnostics tab.
Files
In theArquivostab, the documents and resources necessary for updating the device's firmware are listed.
Final considerations
SR1041E meets basic supply and remote support needs, maintaining communication with IXC Provider for sending crucial data such as PPPoE credentials and Wi-Fi information. For operations requiring advanced mesh control (Mesh) or remote web interface management, the restrictions listed in the functionality tables should be observed.